Izdelki za cevi za (102)

Steam 6 bar (90 psi) Hot water 15 bar (225 psi) FDA 3A Arrêté du 09/11/94 D Application Saturated steam and hot water supply in general industrial applications Specially designed for use in the food and dairy industry. Also suitable for liquid food and alcoholic drinks. Steam hose:Alfagomma 350LE Inner wall:White EPDM Reinforcement:High tensile strength textile cords Outer wall:Blue EPDM - heat, abrasion and ozone resistant Temperature range:Water -40 °C +120 °C (-40 °F +248 °F) steam +165 °C (+330 °F) Diameter:13mm to 51mm

Outer shell Red synthetic elastomer abrasion and ozone resistant. Make / type:Alfagomma 284AH Inner wall:Black synthetic elastomer - resistant to oil mist Reinforcement:High tensile strength textile cords Application:Air and water supply Temperature range:-10 °C +60 °C (+14 °F +140 °F) Diameter:13mm to 25mm

Stainless Steel Guillemin Female Thread Material:stainless steel Sealing:NBR Working pressure:16 Bar Connection:Female thread Diameter:1.1/2'' to 4''

Construction Gray PVC with spiral blue stripe abrasion and ozone resistant. Application Water suction and discharge. Special construction for slurry tankers. Good flexibility at low temperature. Make / type:Alfagomma 267BE Reinforcement:White shockproof rigid PVC Temperature range:-20 °C +60 °C (-4 °F +140 °F) Diameter:25mm to 203mm

Steel Hose Connector Material:Steel Working pressure:12 Bar Diameter:13mm to 203mm

Geka Coupling With Grommet Material:Brass Sealing:NBR Working pressure:10 Bar Diameter:10mm to 38mm

Clamp Scale Steam With Fingers Material:Cast Iron Fingers:2 & 3 fingers Bolts:2, 4 or 6 bolts Diameter:1/2'' to 4''

Interchangeable with Cejn 300, Hansen 100 & AutoFlo 23, Orion 44150 & 44515, Proquix 1280, 1281, RectusTema 14 & 22 Material:galvanized steel Working pressure:Max 35 Bar Diameter:1/4'', 3/8'' and 1/2'' Thread type:BSP, NPT Connection:male

Construction Green transparent PVC abrasion and ozone resistant. Make / type:Alfagomma 264GL Reinforcement:White shockproof rigid PVC Application:Water suction and discharge Temperature range:-5 °C +60 °C (+23 °F +140 °F) Diameter:20mm to 51mm

Reinforcement High tensile strength textile cords and embedded steel spiral wire antistatic wire. Outer wall Black conductive CR abrasion, ozone, hydrocarbon and fire resistant. Application Transfer of fuel, oil and sludge from supply vessels to offshore platforms. Also suitable for pumping seawater and barite transfer. Also available in self floating version. Reserve buoyancy calculated according to GMPHOM 2009 standard. End load tensile resistance ID 2" 2,000 kg ID 3" 4,000 kg ID 4" 7,000 kg ID ≥ 5" 10,000 kg ABS Type Approved Hose Assemblies. Electrically continuous. Make / type:Alfagomma 615AA Inner wall:Black conductive NBR Temperature range:-30°C +90°C (-22°F +194°F)

Application Supply of air, water and mild chemicals in general industrial applications. Options JB Rubber & Industrie BV can provide the 976AB with the couplings you require. Make / type:Alfagomma 976AB Inner wall:Black conductive EPDM Reinforcement:High tensile strength textile cords Outer wall:Gray EPDM - wear resistant and ozone resistant Temperature range:-40 °C +100 °C (-40 °F +212 °F) Diameter:6mm to 25mm

Stainless Steel Clamping Shell Coupling Male Material:stainless steel Thread Type:BSPP Female Thread Working pressure:25 Bar Diameter:1/2'' to 4''

Application Transfer of petrol and diesel in cars. Also suitable for unleaded petrol and eco diesel. Make / type:Alfagomma 689AA Inner wall:Black NBR Reinforcement:High tensile textile braid Temperature range:-20 °C +100 °C (-4 °F +212 °F) Diameter:3.5mm to 9.5mm

Interchangeable with Cejn 300, Hansen 100 & AutoFlo 23, Orion 44150 & 44515, Proquix 1280, 1281, RectusTema 14 & 22 Material:galvanized steel Working pressure:Max 35 Bar Diameter:1/4'', 3/8'' and 1/2'' Thread type:BSP, NPT Connection:male

Reinforcement High tensile strength textile cords and embedded steel spiral wire. Outer wall Black CR abrasion, ozone, seawater and hydrocarbon resistant. Application Fuel and oil extraction and delivery. Designed for long life in tough applications. Also suitable for bunker service. Electrically continuous (discontinuous on request). Brand / type:Alpha gum 60PAA Inner wall:Black NBR Temperature range:-20 °C +82 °C (-4 °F +180 °F)

Tapered silicone bellows are available in various tapered sizes. Contact us for more information. Inner wall:Red silicone Reinforcement:Polyester insert Outer wall:Blue silicone Application:Coolant, air and water Temperature range:-56 °C +180 °C (-70 °F +356 °F)

Silicone Bend 45° "blue" 152 Mm Inner wall:Blue silicone Reinforcement:Polyester insert Outer wall:Blue silicone Leg length:152 mm Application:Coolant, air and water Temperature range:-56 °C +180 °C (-70 °F +356 °F) Standard:Meets or exceeds SAEJ20 R4 Class A

Brass Compression Fitting Female Material:Brass Seal:PUR Thread Type:BSPP Female Thread Working pressure:25 Bar Diameter:1/2'' to 4''

Silicone Bellows "red" Stainless Steel Rings Inner wall:FVMQ fluoro-silicone Reinforcement:Meta-Aramid Outer wall:Red silicone Application:Coolant, air and water, turbo purposes Temperature range:-55°C / +200°C (-67°F / +392°F)

Stainless Steel Guillemin With Locking Ring Material:stainless steel Sealing:NBR Working pressure:16 Bar Connection:Hose tail Diameter:50mm to 100mm

Perrot/cardan Female Tulle Material:galvanized steel Type:female with toggle Connection:Hose tail Working pressure:12 Bar Diameter:50mm to 200mm

Outer wall Black conductive CR oil, abrasion, ozone and seawater resistant. Make / type:Alfagomma 949AA Inner wall:Black NBR - oil, abrasion and seawater resistant Reinforcement:High tensile strength textile cords Application:Fish transfer from fishing net to ship deck Temperature range:-30°C +80°C (-22°F +176°F) Diameter:254mm to 508mm

Pvc Seed Drill Hose Transparent 8 Bar Make / type:Alfagomma 266OA Construction:Transparent PVC - wear resistant and ozone resistant. Reinforcement:Black shockproof rigid PVC. Application:Agricultural seed transfer in "Air-Flo" sowing equipment Temperature range:-5 °C +60 °C (+23 °F +140 °F) Diameter:25mm to 76mm

JB Rubber & Industrie BV can provide the concrete pump hose with the couplings you require. Make / type:Alfagomma 741AA Inner wall:Black conductive NR - abrasion resistant Reinforcement:High tensile steel cords Outer wall:Black conductive SBR/NR - abrasion and ozone resistant Temperature range:-30°C +80°C (-22°F +176°F) Diameter:51 mm to 127 mm

Aluminum Clamping Shell Set Material:Aluminum Material Bolts:galvanized steel Working pressure:16 Bar Diameter:13mm to 200mm

Weld On Hose Tail Material:Steel Working pressure:12 Bar Pillar diameter:1/2'' to 8'' Welding part diameter:21.7 mm to 218.5 mm

Pipe Clamps Bolt Hole:M6 Bandwidth:13mm Material thickness:0.8 mm Size:3.2-65mm Rubber:EPDM Available material:W1, W5

Propane Hose Orange 20 Bar Make / type:Alfagomma 076AL Inner wall:Black SBR Reinforcement:High tensile strength textile cords Outer wall:Orange SBR/EPDM - wear resistant and ozone resistant Application: LPG welding Temperature range:-25°C +80°C (-13°F +176°F) Diameter:6mm to 10mm

Pvc Hose Without Insert Make / type:Alfagomma 490OO Construction:Transparent PVC Application:General purpose. Sterilize with 5% soda solution Temperature range:-5 °C +60 °C (+23 °F +140 °F) Diameter:3mm to 25mm

Reinforcement High tensile strength textile cords and embedded steel spiral wire. Outer shell Black CR wear, ozone, seawater and hydrocarbon resistant. Application Suction of crude oil and liquid petroleum products; and delivery from/to tankers and bunker vessels. max. 55% resistance to aromatics. Electrically continuous (discontinuous on request). Builtin fittings. 60EAA 100% aromatics content 60FAA biofuel Make / type:Alfagomma 60DAA Inner wall:Black NBR Temperature range:-20 °C +82 °C (-4 °F +180 °F)